ENABLE=en_0b0, REPLACE=en_0b00
Flash Patch Comparator Registers
ENABLE | Compare and remap enable for Flash Patch Comparator Register 0. The ENABLE bit of FP_CTRL must also be set to enable comparisons. Reset clears the ENABLE bit. 0 (en_0b0): Flash Patch Comparator Register 0 compare and remap disabled 1 (en_0b1): Flash Patch Comparator Register 0 compare and remap enabled |
COMP | Comparison address. |
REPLACE | This selects what happens when the COMP address is matched. Settings other than b00 are only valid for instruction comparators. Literal comparators ignore non-b00 settings. Address remapping only takes place for the b00 setting. 0 (en_0b00): remap to remap address. See FP_REMAP 1 (en_0b01): set BKPT on lower halfword, upper is unaffected 2 (en_0b10): set BKPT on upper halfword, lower is unaffected 3 (en_0b11): set BKPT on both lower and upper halfwords. |